Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 75)

W e b S e r v e r I n t e r f a c e 3-47
Figure 3.40 Top Talkers Screen
To generate a Top Talkers report, enter the desired report size in the
appropriate field, and then click the “Submit” button.
Duration Establishes the amount of time (in seconds) for which the Top Talkers report
will capture IP traffic; typically this value is 900 seconds (15 minutes).
Time Remaining Establishes the amount of time (in seconds) for which the Top Talkers report
will capture IP traffic; typically this value is 900 (15 minutes). As soon as
you initiate generation of the report by pressing the “Submit” button, the
Duration value is copied over to the Time Remaining field. Click on the
hyperlink to see how much time is left before the report is completed.
Requested Report Size Establishes how many IP Addresses will be reported as the “Top Talkers.”
NOTICE: While you may request any number, the unit is internally limited to a
maximum of 20.
As soon as the specified Duration for the report has elapsed, the screen will
refresh itself and the resulting report-specific information will be displayed in
the outlined box at the bottom of the screen. This report comprises elements
as defined in the following paragraphs.
Report # This field displays a unique number used to identify the generated report. This
number is generated automatically, is incremented sequentially for each
report, and can be used by management stations for automatic polling (via the
ipadv2.mib).
Size Displays the actual number of IP Addresses identified as Top Talkers in the
generated report. The maximum report size is 20.
Start Time Displays the time at which the Top Talkers report was initiated (based on
System Up Time).
System Up Time Displays the amount of time that the unit has been operational since it was
turned on or last reset.