Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 104)

3-76 W A N s u i t e 6 4 5 0
State If Enabled, reflects the state of the port. “Blocking” means there is no data
transfer between LANs. “Listening” means the frames received from this port
are filtered, but do not modify the Lookup Table. “Learning” means that
while the port continues to look at frames without participating in data
transfer, the frames received from the port will be used to update the Lookup
Table. “Forwarding” means the port participates fully in data transfer and the
frames received are used to update the Lookup Table.
Designated Root MAC Address of the designated root of the spanning-tree topology.
Designated Cost Associated Path Cost to the route for this port.
Designated Bridge Designated Bridge MAC Address.
Forward
Transmissions
Number of times this port has changed from any other state to a “Forwarding”
state.
Input Frame Number of frames received.
Output Frame Number of frames transmitted.
Input Discards Number of frames discarded.
Figure 3.75 Bridge Lookup Table
Address MAC Address learned and included in the forwarding table.
Port Port where the MAC Address was learned.
Status How the address was included in the forwarding table. (Currently, only
“learned” will appear.)
Simple Mail Transfer Protocol (SMTP)
Use the SMTP Details Screen (Figure 3.76) to configure the SMTP function
of the WANsuite 6450. SMTP is used to forward notification of events to a
user-definable list of up to five recipients. The even notification is sent as an
e-mail in the following format:
From: [email protected]
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name: