Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 42)

3-14 W A N s u i t e 6 4 5 0
Figure 3.13 CBR Screen
T1/E1 Framing Selects the framing for the network side of the DSU/CSU.
Values T1 ESF, T1 D4, E1 CCS, E1 CAS
E1 Unframed, T1 Unframed
Default: E1 CCS
NOTICE: To set unit to Signaling mode, you must first configure the following: on
the CBR screen (page 3-13), configure Framing; on the Channel Table
Details screen (page 3-37), set Rate to 56k/Signaling, and on the CES
Service Details screen (page 3-34), configure AAL1 Format.
T1/E1 Coding Sets the CBR interface line coding.
Values: HDB3, AMI, B8ZS
Default: HDB3
NOTICE: For a T1 CBR Maintenance Reset, the default is T1 ESF. The T1/E1
coding default is B8ZS.
T1 PRM Lets you establish which performance messaging standard will be employed
to initiate Performance Report Message (PRM) functions. Setting this field to
“Enable” instructs the unit to use ANSI T1.403, which sends a PRM once
every second. Setting this field to “Disable” instructs the unit to use AT&T
TR54016, which provides performance reporting on request only.
Values: Disable, Enable
Default: Disable