Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 115)

V T 1 0 0 I n t e r f a c e 4-7
Interfaces
As shown on the Interfaces screen (Figure 4.6), the WANsuite 6450 has five
interfaces: Network, CBR, Serial, Ethernet, and Supervisory. Each of these is
described in detail below.
Figure 4.6 Interfaces Screen
Network
The Network screen (Figure 4.7) lets you view and make changes to the
Network interface's configuration.
Figure 4.7 Network Screen
The Network screen parameters are described in the following paragraphs.
Unit Type Selects the unit type. TU-R represents a CPE terminal unit; TU-C represents a
CO terminal unit.
Values: TU-R, TU-C
Default: TU-R