Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 61)

W e b S e r v e r I n t e r f a c e 3-33
The table displayed on this screen contains information on ATM traffic
descriptor type and the associated parameters.
Service Category ATM service category. Possible values include CBR, VBR, and UBR.
Param 1 (PCR) Peak cell rate in cells per second.
Param 2 (SCR) Sustainable cell rate in cells per second. Applicable only to VBR service
category.
Param 3 (MBS) Maximum burst size in cells. Applicable only to VBR service category.
Row Status Current status of the VCC.
Clicking on one of the available “Traffic Description Parameters Index”
entries on the ATM Quality of Service Profiles screen will display a screen
similar to the screen shown in Figure 3.31. Use this screen to configure or
change the QoS parameters listed below.
Figure 3.31 ATM Quality of Service Details Screen
Parameter 1 (PCR) Peak cell rate in cells per second to use for all channels using this QOS
profile.
Parameter 2 (SCR) Sustainable cell rate in cells per second to use for all channels using this QOS
profile. Applicable to VBR only.
Parameter 3 (MBS) Maximum burst size to use for all channels using this QOS profile.
Applicable to VBR only.
Service Category ATM service category.
Values: CBR, VBR, UBR
Default: UBR
Row Status Current status of the profile.