Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 33)

W e b S e r v e r I n t e r f a c e 3-5
Figure 3.2 Maintenance Reset Screen
NOTICE: Performing a “Maintenance Reset” or a “Save and Restart” will
terminate communications with the unit.
Save and Restart
The Save and Restart button on the Unit screen will display the confirmation
screen shown in Figure 3.3.
Figure 3.3 Save and Restart Screen
Click the “Save and Restart” button on the confirmation screen to proceed
with the action. To cancel, simply invoke your browser’s “Back” function.
Interfaces
The WANsuite 6450 unit has five available interfaces: Network, CBR, Serial,
Ethernet 10/100, and Supervisory. These interfaces are described below.
Network
The WANsuite 6450 Network screen (Figure 3.4) lets you view and make
changes to the Network interface's configuration.