Measurement Computing WBK Options User Manual
Page 64
Sensor Configuration Main Components
Sensor Configuration [Calibration] Window
Sensor Configuration Toolbar and Pull-Down Menus
Control functions in the sensor configuration window are available through the pull-down menus or the
toolbar. For descriptions of button functions, see the related menu selections. Note that some menu
selections have no corresponding button.
Sensor Configuration Window Toolbar
1 – New Configuration; 2 – Load an Existing Configuration; 3 – Save Current Configuration
4 – Take a Single Reading; 5 – Calibrate Enabled Channels; 6 – Return to WaveView
File
The File menu provides four functions:
New Configuration
Set all parameters to their default startup setting.
Load an Existing Configuration
Load a saved sensor calibration configuration.
Save Current Configuration
Save the current sensor calibration configuration for later recall.
Return to WaveView
Exit the Sensor Configuration window and return to WaveView.
WBK16, pg. 24
949794
WBK16, Strain-Gage Module