Measurement Computing WBK Options - Manual (Page 114)

WBK17, pg. 36 987996 WBK17, Counter/Encoder Module
Fuse Replacement
The WBK17 has three user-replaceable fuses as follows:
•
F1 - Power Output Fuse (for +15V Encoder Power). 1.0 A, Mini ATO. Located near the center of
the front panel (see figure).
•
F2 - Power Output Fuse (for +5V Encoder Power). 2.0 A, Mini ATO. Located near the center of
the front panel (see figure).
•
F201 – Input Power Fuse. 4.0 A, Mini ATO. Located between the 5DIN Power In connector and the
DC/DC Converter (see figure).
WARNING WARNING WARNING WARNING
Electric shock hazard! Remove the WBK17, and all devices connected to it, from
power before removing the WBK17’s cover plate. Failure to do so could result in
electric shock and possible death.
CAUTION CAUTION CAUTION CAUTION
Be careful to avoid component damage while WBK17 enclosure is open.
Locations of WBK17’s User-Replaceable Fuses