Measurement Computing WBK Options - Manual (Page 63)

WaveView Configuration Main Window(Top) and
Sensor Configuration [Calibration] Window (Bottom)
To open the Sensor Configuration [Calibration] window, click on WaveView’s Sensor
Calibration button. The button is depicted at the left and pointed out in the upper portion of the
previous figure. You can also open the window from WaveView’s System pull-down menu.
You can use the Sensor Configuration window’s File pull-down menu to Load an Existing
Configuration. This option opens a standard dialog box that allows you to select and open the
desired file.
WBK16, Strain-Gage Module 949794 WBK16, pg. 23