Measurement Computing WBK Options - Manual (Page 162)

3. Locate fuse F201 near the Power In DIN 5 Connector (left edge of the rear panel, see figure).
4. While wearing a grounded wrist strap, remove and replace the bad fuse. Ensure that the new
fuse is fully seated.
5. Replace the cover plate and secure it to the chassis with the 4 screws that were removed in
step 2.
6. Return the WBK25 Ethernet Interface Module to normal service. Should any problems be
noted consult the factory.
Specifications
Environment
Operating: 0 to 50°C (32° to 122°F); 0 to 95% humidity, non-condensing
Storage: -20° to 70°C (-4° to 158°F)
Power: 0.75A @ 15V
Fuse:
F201 Input Power Fuse. 4.0 A, MINI ATO. Factory Part Number: FU-8-4
Littelfuse Part Number: 297-004, Littelfuse Body Color Code: Pink
Dimensions: 285 mm W x 220 mm D x 35 mm H (11” x 8.5” x 1.375”)
Ethernet Interface: 10/100BaseT
Ethernet Connector: RJ45
Parallel Interface: Three EPP (Enhanced Parallel Ports)
Parallel Connectors: DB25, female
Accessories & Cables Part No.
Fastener-panel kit for WBK series 262-0801
Fastener-panel kit for DBK series 232-0810
Fastener-panel handle HA-111
DB25 male to DB25 female parallel cable, 2 ft. CA-35-2
DB25 male to DB25 female parallel cable, 1 ft. CA-35-12
Ethernet patch cable, 1.5 ft. CA-242
Ethernet patch cable, 7 ft. CA-242-7
Note: WBK25 is supported in the 32-bit driver only.
WBK25 Ethernet Interface Module User’s Guide 919896 WBK25, pg. 17