Measurement Computing WBK Options - Manual (Page 10)

6 Introduction 988397 WBK Option Cards and Modules
WBK modules can be stacked using fastener panels, sometimes referred to as splice plates. The panels
provide a means of stacking modules to create one rigid assembly. The Fastener Panel Kit, p/n 262-0801,
is available from the factory and consists of two metal plates and the necessary mounting screws.
A Fastener-Panel Handle (p/n HA-111) is also available from the factory. HA-111 consists of 1 handle and
two mounting screws.
The previous figure illustrates the simplicity of the mounting process.
Note: When used with a WBK16, WaveBook/516, WaveBook/516A, or WaveBook/512A, fastener
panels will partially block the vents on the side of the module. This partial blocking of vents
does not jeopardize the cooling process.