Measurement Computing WBK Options - Manual (Page 153)

The power management and power requirements sections of the associated user’s
manual(s) should be reviewed prior to powering up a system.
For DaqBook/2000 Series systems refer the DaqBook/2000 Series User’s Manual
(p/n 1103-0901).
For WaveBook systems refer to the WaveBook User’s Manual (p/n 489-0901).
The PDF versions of these documents can be accessed from the data acquisition CD via the
button on the CD’s opening screen.
STEP 5 - Configure the Computer’s Network Settings [Applies to “dedicated networks” only]
If using a LAN (Local Area Network), which has a DHCP server, skip this section and continue
with
STEP 7 - Configure and Test the System using the Daq*Configuration Applet (page 12).
If using a LAN (Local Area Network), which has no DHCP server, skip this section and
continue with
STEP 6 - Configure Device Network Settings using DaqIPConfig (page 10).
1. Open the Control Panel by navigating from the Windows Desktop as follows:
Start Menu ⇒ Settings ⇒ Control Panel.
2. Double-click the “Network and Dial-up Connections” icon.
3. Double-click the “Network Connection” icon for the network that the WBK25 is connected
to.
Local Area Connection Status
4. In the “Local Area Connection Status” box (previous figure), click on the <Properties>
button. The “Local Area Connection Properties” box will appear (following figure).
WBK25, pg. 8 919896 WBK25 Ethernet Interface Module User’s Guide