Measurement Computing WBK Options User Manual
Page 211
WBK61 and WBK62, High-Voltage Adapters
988296
WBK61 and WBK62, pg. 3
3. If connecting only one WBK61/62, connect the green banana plug/alligator clip lead (CN-111) from
the WBK61/62 earth ground connector to the local earth ground.
If connecting two or more WBK61/62s, connect the green banana plug/alligator clip lead (CN-111)
from the last WBK61/62 earth ground connector to the local earth ground. Refer also to step 2 and the
above figure.
4. Connect the input leads (CA-152) to the WBK61/62 Input HI and Input LO jacks.
5. Connect the test leads (CA-152) to the circuit under test. You may use alligator clips (CN-109) to
connect test leads.
If desired, set the applicable WaveBook channel(s) to the appropriate scale by setting the mx+b function in
the WaveView program as discussed in the following section, Software Setup.