Measurement Computing WBK Options - Manual (Page 12)

pg. 2, WBK10A 988397 WBK10A, Analog Expansion Module
The front panel has the following connectors and indicators:
WBK10A Front Panel
• 1 Analog Common binding post for reference.
• 8 BNC connectors for analog inputs. Channels are labeled 1 through 8.
• 3 Status LEDs (Active, Ready, Power).
The rear panel has a power switch and the following connectors:
WBK10A Rear Panel
• 2 DIN5 connectors [one for Power In, one for Power Out]
• 1 HD-15M Expansion Control In
• 1 HD-15F Expansion Control Out
• 2 BNC connectors [one for analog Expansion Signal In,
one for analog Expansion Signal Out]
Reference Notes:
➣
Setup information pertaining to power, expansion control, and expansion signal connections
is contained in the System Setup and Power Options chapter of the WaveBook User’s
Manual (p/n 489-0901).
➣
For detailed WaveView information, refer to the WaveView Document PDF that is
included on the data acquisition CD. The document can be accessed using the
button on the CD’s opening screen.