Hypertherm THC ArcGlide - Manual (Page 49)

ArcGlide THC Instruction Manual 806450 49
1 – Specifications
Figure 7
In a Hypernet configuration, serial communication is carried on the Hypernet cable between the CNC and the ArcGlide
THC and the ArcGlide plasma interface board in the plasma system. Within the plasma system, serial communication is
carried between the ArcGlide plasma interface board and the plasma control board by a serial cable (123760).
Station 1
Lifter
HPR plasma system
HMI
Hypernet address: 1
ArcGlide control module
Hypernet address: 1
Hypernet plasma interface
board
Hypernet address: 1
HyPath CNC Ethernet switch
HMI
Hypernet address: 2
ArcGlide control module
Hypernet address: 2
HPR plasma system
Hypernet plasma interface
board
Hypernet address: 2
Lifter
Station 2
Key:
Hypernet connection
Discrete connection
CNC
ArcGlide
ArcGlide
plasma
interface
board
Plasma
control board
Hypernet
Cat5e or Cat6
Hypernet
Cat5e or Cat6
RS-422