Hypertherm THC ArcGlide - Manual (Page 155)

ArcGlide THC Instruction Manual 806450 155
3 – Operation
Manual mode
In Manual mode, only errors and Pierce Delay information is displayed.
Figure 41
Error: The most recent error condition.
Pierce Delay: 0 – 10 seconds with 0.01 second resolution (Pierce Delay is Pierce Time in Phoenix software).
Return to the Setup parameters display.
Lifter Disabled mode
When the lifter is disabled, there are only two parameters that display.
Figure 42
Arc Starts: The number of times the arc has started since the last time consumables were changed and the counter was
restarted.
Arc Minutes: The number of minutes of active cutting since the last time consumables were changed and the counter
was restarted.
Manual
NO ERRORS
Pierce Delay
1.00s
Disabled
Arc Starts 72
Arc Minutes 146