Cnc i/o cable – Hypertherm THC ArcGlide User Manual
Page 105
ArcGlide THC Instruction Manual 806450
105
2 – Installation
CNC I/O cable
CNC discrete I/O on page 108 for more information about discrete CNC I/O signals.
Part number
Length
Part number
Length
223213
3.0 m (10 feet)
223107
23.0 m (75 feet)
223214
6.0 m (20 feet)
223108
30.5 m (100 feet)
223122
7.5 m (25 feet)
223109
45.5 m (150 feet)
223215
10.5 m (35 feet)
223110
61.0 m (200 feet)
223005
15.0 m (50 feet)
Connect this end to
the CNC by adding the
appropriate connector
for your CNC.
Yellow band
Diameter = 13.72 mm (0.54 inch)
Bend radius = 152.40 mm (6 inch)
Connect this end to the port on the
control module with the yellow ring.