Gasboy CFN Site Controller - Manual (Page 39)

Pump Interface Manual v1.3 Gilbarco Interface Unit 31
03/20/03 Gasboy CFN Series
In most cases, the limits and cutoffs should be in dollars. Gallon cutoffs and limits can only
be used on Highlines. Cash/credit must have a cutoff loaded as $999. The limits and cutoffs are
explained in further detail in the Current Loop Interface Unit Installation Manual.
An ongoing transaction viewed on the console will never show the incrementing gallons,
only the dollars. Older pumps may not even show the dollars incrementing.
Use Gilbarco firmware version 70.2 or later. Product authorization does not work with
Gilbarco pumps before version 2.0c of Gasboy’s interface firmware and version 2.0cp2 of the
SCII software.
Advantage Super High special settings
Advantage Super High (model BD1) has the following PUMP.BIN configuration requirements.
Side ‘B’ of the pump must have 2 hoses assigned as illustrated.
In Pump type - submenu 1:
In Pump Control Units - submenu 2:
In Add Pump types - submenu 3:
CRIND
Version 2.0B or later of the Site Controller software and 2.0 or later of Gasboy’s interface
firmware are required to run a Gilbarco CRIND (Card Reader IN Dispenser). The CRIND
should be on the RS-422/485 port.
Keypad
The keys on the CRIND keypad can be configured for different functions with the Tokheim DPT/
Gilbarco CRIND keyboard layout item on page 4 of the SCII and CFN3’s SYS_PAR program.
The characters that select different functions are shown below. Note that these characters are
case-sensitive:
# Pump type Cl Slow Fill Max Pulse Hoses
1. GILBARCO MPD 1 0.250 $50 0 1000/G 1
2. GILBARCO MPD 1 0.250 $50 0 1000/G 2
1. ELECTRONIC PCU 1:1 2:2
2. ELECTRONIC PCU 1:3 2:4
3. ELECTRONIC PCU 1:5 2:6
#. GILBARCO MPD (2) 1,5,7,9