Gasboy CFN Site Controller - Manual (Page 27)

Pump Interface Manual v1.3 Insight Interface - CFN3 only 19
03/20/03 Gasboy CFN Series
The parameter file also allows you to set messages to be used for some pre-defined conditions.
The keyword phrase should be sufficient to describe the condition in which each message is
displayed.
INSERTED_WRONG_MESSAGE=Card inserted wrong Please insert again
READ_ERROR_MESSAGE= Read error Please insert again
REMOVE_CARD_MESSAGE= Remove Quickly
BAD_CARD_MESSAGE=Unable to read card Use a different card
SALE_CANCELLED_MESSAGE=Sale Cancelled
PLEASE_WAIT_MESSAGE=One moment please...
Cash, credit and debit prompt are displayed for softkey labels during “Press payment key”.
CASH_HERE_PROMPT=Cash Here
CASH_INSIDE_PROMPT=Cash Inside
CREDIT_HERE_PROMPT=Credit Here
CREDIT_INSIDE_PROMPT=Credit Inside
DEBIT_HERE_PROMPT=Debit Here
DEBIT_INSIDE_PROMPT=Debit Inside
The following setting determines whether the Insight should run in graphics mode or in native
mode with no graphics or softkeys. If the line is missing the Insight assumes graphics mode
(NATIVE_MODE=N).
NATIVE_MODE=Y
or
NATIVE_MODE=N
Car Wash
Use the softkey sequence ~w in the Unitec car wash parameters (3) menu in gate configuration
(of the site controller - see your Configuration manual). This gives the most basic wash type
selection with 4 choices.
This can be further refined by adding the following lines to the parameter file (insight.a0x).
With this setting it does not use the DEBIT module, only softkeys. This is the main car wash
type prompt that appears:
WASH_TYPE_PROMPT=Select car wash type
Substitute your own text as desired.
The following are the types of washes available for wash types 1-4 listed in order starting with 1.
There may be up to 6 types. This group of wash types can be placed anywhere in the Insight.A0x
file.
WASH_TYPE=reg
WASH_TYPE=super
WASH_TYPE=deluxe
WASH_TYPE=ult
Softkeys ~W “car wash” and ~q “yes/no” are used by the graphical display. ~W will display
“Want Car wash” and ~q displays “Yes/No” question hands. Insert these in the ICR Program
(menu 1) Want Car Wash, type step 8 (of the site controller - see your Configuration manual).
Substitute your own softkey labels as desired.