Gasboy CFN Site Controller - Manual (Page 33)

Pump Interface Manual v1.3 Gilbarco Interface Unit 25
03/20/03 Gasboy CFN Series
4
Gilbarco Interface Unit
Part number: C05688.
Interfacing to Gilbarco pumps
NOTE: For more detailed information on a Gilbarco Interface please read the Gilbarco Interface
Unit Installation Manual (C01745).
Use only SCII v2.0B or above with CRINDS. With Gasboy Gilbarco interface firmware, use
v2.0 or above with CRINDS. All versions of CFN3 software work with Gilbarco.
Use Gilbarco firmware version 70.2 or later. Product authorization does not work with Gilbarco
pumps before version 2.0c of Gasboy’s interface firmware and version 2.0cp2 of the SCII
software.
Compatibility of Gilbarco Pumps with CFN Series
The only Gilbarco Electronic pump that does not interface to the SCII is the Gilbarco MPD-2.
The Site Controller I does not interface to the MPD Pro Blender or any Gilbarco Cash/Credit
pumps.
The following is a brief description of the different types of Gilbarco Pumps:
1. HIGHLINE: This is equivalent to the Gasboy Model 8800. This pump can be a
single or twin hose. They can be modular or non-modular. The modular pumps are
programmed through a keypad that is on the pump. The non-modular pumps have
a logic board (assembly #W01520) that has to be jumpered. Newer Gilbarcos are
all modular. Hoses are mounted on the sides of the pump.
2. SALESMAKER II: Very similar to Highlines except hoses are mounted on the
front and back faces of the pump versus the sides.
3. SALESMAKER IV: Same as Salesmaker II but has 2 hoses on each face versus 1
(like a MPD).
4. MPD: Multi Product Dispenser. Has multiple hoses mounted on the front and
back faces of the dispenser. Can be modular or non-modular.
5. SALESMAKER PRO BLENDER: Variable Blender (1 hose, 5 products)
6. MPD PRO BLENDER: Variable Blender (2 hoses, 1 hose is assigned to 1
product, other hose allows 5 product blending). This pump was specifically
designed for Sunoco stations. REMEMBER, Gasboy does not interface to this
blender.
7. ADVANTAGE SERIES: Several different types. It can be a variable blender or a
fixed blender or a straight 3 hose MPD (requires Gilbarco Firmware version 70.5
or greater).
8. 3+1. 3 Blended products (regular, plus, and super) plus a diesel hose.