Gasboy CFN Site Controller User Manual

Page 14

Tokheim

Pump Interface Manual v1.3

Gasboy CFN Series

03/20/03

Numbers of keypad keys on the Premier:

Default function arrangement of the Premier keypad:

The string that would be typed into the Tokheim DPT keyboard layout item in SYS_PAR to give
the Premier keypad function arrangement shown above is:

BN147hBN2580nY369bYCCEE

Some TCS and Premier keys are “double” keys, made up of a pair of single keys. On a double
key, the same function must be selected for each member of the pair. On the TCS, 1 and 7, 13 and
19, 2 and 8, 14 and 20, 21 and 22, and 23 and 24 are pairs in a double key. On the Premier, keys
1 and 7 must be the same, and keys 13 and 19 must be the same.

Page 4 - Auto Receipt

Set Auto Receipt to 5 (Auto Ask, Auto on Pump completion) if DPT has a receipt printer.

Page 8 - Tokheim Channel

SCII only:

On page 8 of the

SYS_PAR.BIN

configuration program,

TOKHEIM CHANNEL 1

and

TOKHEIM CHANNEL 2

parameters must be configured to be the same port (either 1 or 3), when

using the Tokheim splitter described later in this chapter. This setting is effective only for release
2.0B and above; it won’t work for releases 1.0 or 2.0.

SCII/CFN3:

The

PUMPS ON FIRST TOKHEIM CHANNEL

parameter must be configured to the amount

of pumps on the Tokheim 67 or 98 box, or to the amount of pumps on the first two 98 boxes (if
there are more than two 98 boxes and a C06694 (SCII) or C07080 (CFN3) cable assembly is
being used).

Page 9 - Blank pump display

Blank pump display after should be set between 30 seconds and 100 seconds with 60 seconds
being a commonly used value. If the time is set for a high number of seconds (for example 600
seconds), the site may experience a problem downloading new prices to the pumps.

LO ME;C

Use the load message (LO ME) command in the site controller to load the DPT messages. To
access the 4 lines of the Premier display (or 2 lines for a TCS display), use the tilde character (~)