Pump.bin – Gasboy CFN Site Controller User Manual
Page 11

Pump Interface Manual v1.3
Tokheim
3
03/20/03
Gasboy CFN Series
Submenu 3 must be set up as follows:
1.
AutoPump Select
YES
2.
Device Type
6 for Tokheim DPT (for v2.0B and above),
1 (for v2.0 or v2.0a)
3.
Rep Pump #
Designates the pump # of the DPT/Insight
The DPT CPU must be addressed to match how it is configured in
READER.BIN
. Keep this in
mind especially if the site is also using stand-alone receipt printers. For example, if the address
set in
READER.BIN
is 4 then the DPT CPU must also be set with an address of 4.
PUMP.BIN
The
PUMP.BIN
configuration program must be configured to indicate the type of Tokheim
pumps being used.
1.
Do not use Option 12 with Tokheim blenders.
2.
Option 16 must be included for the pump type if the pump/dispenser is a PRE-
MIER. (Only v2.0 and above supports PREMIERS)
3.
Option 18 in the pump type lets the offhook beep inside before the payment type is
selected (PAYINSIDE/PAY OUTSIDE).
4.
Option 19 should be added to the pump type if the pump has grade select buttons.
In submenu #2 (PCUs) of the
PUMP.BIN
program, there is only one slot assigned to each
Tokheim PCU. For Tokheim pumps, you will be required to assign each pump as its own PCU.
So if a site had two TCS units with three hose outlets on each side, this would be the equivalent
of 4 pumps. The assignments will look like this:
Tokheim PCU 1 1:1
Tokheim PCU 3 1:3
Tokheim PCU 2 1:2
Tokheim PCU 4 1:4
In submenu #3, the pump types should have the following options, the last 4 are not in the
default configuration:
Tokheim type
Options to set
162/262
2,7
262-A
2,7,8,9,13
SA MMD
1,2,7,8,9
SA MMD $/Cr
1,2,3,7,8,9
TCS
1,2,7,8,9,13
TCS $/Cr
1,2,3,7,8,9,13
TCS 1 hose blend
1,2,7,8,9,12,13,19
TCS 1 hose blend $/Cr
1,2,3,7,8,9,12,13,19
Premier
1,2,7,8,9,13,16
Premier $/Cr
1,2,3,7,8,9,13,16
Premier 1 hose blend
1,2,7,8,9,12,13,16,19
Premier 1 hose blend $/Cr
1,2,3,7,8,9,12,13,16,19
Premier blender
1,2,7,8,9,12.13,16
Premier blender $/Cr
1,2,3,7,8,9,12,13,16
Premier 1 hose, 1 prod
2,7,8,9,13,16
Premier 1 hose, 1 prod $/Cr
1,2,3,7,8,9,13,16
*TCS 1 hose, multigrade, non-blend
1,2,7,8,9,13,19
continued
on next page