1 onboard voltage supply requirement, 2 power up sequencing requirements, Table 4-1 – Artesyn MVME2500 ECC Installation and Use (August 2014) User Manual
Page 81: Voltage supply requirement, Functional description
Functional Description
MVME2500-ECC Installation and Use (6806800N30F)
81
4.15.1 Onboard Voltage Supply Requirement
The onboard power supply is considered to be out of regulation if the output voltage level is
below the minimum required power or goes beyond the maximum.
4.15.2 Power Up Sequencing Requirements
The power up sequence describes the voltage rail power up timing, which is designed to
support all the chip supply voltage sequencing requirement.
Table 4-1 Voltage Supply Requirement
Voltage Rail
Voltage Rail Requirement
Minimum
Maximum
+3.3 V
3.15 V
3.45 V
+2.5 V
2.375 V
2.625 V
+1.8 V
1.7 V
1.9 V
+1.5 V
1.425 V
1.575 V
+1.2 V
1.14 V
1.26 V
+1.2 V_SW
1.14 V
1.26 V
+1.05 V
1.0 V
1.1 V