Artesyn MVME2500 ECC Installation and Use (August 2014) - Manual (Page 34)

Hardware Preparation and Installation
MVME2500-ECC Installation and Use (6806800N30F) 34
2.3.3 Equipment Requirements
The following are recommended to complete a MVME2500-ECC system:
 VMEbus system enclosure
 System console terminal
 Operating system (and/or application software)
 Transition module and connecting cables
2.4 Configuring the Board
The board provides software control over most options. Settings can be modified to fit the
user's specifications. To configure, set the bits in the control register after installing the board
in a system. Make sure that all user-defined switches are properly set before installing a
PMC/XMC module. For more information, see
Switches on page 63 .