Artesyn MVME2500 ECC Installation and Use (August 2014) - Manual (Page 44)

Controls, LEDs, and Connectors
MVME2500-ECC Installation and Use (6806800N30F) 44
Table 3-1 Front Panel LEDs
Label Function Location Color Description
USER 1 User Defined Front panel Off
Yellow
Red
By default
User Software Controllable. Refer to
the "User LED Register."
User Software Controllable. Refer to
the "User LED Register."
FAIL Board Fail Front panel Off
Red
Normal operation after successful
firmware boot.
One or more on-board power rails
has failed and the board has
shutdown to protect the hardware.
Normal during power up, during
hardware reset (such as a front panel
reset). May be asserted by the BDFAIL
bit in the Tsi148 VSTAT register.
GENET1
SPEED TSEC1
Link/Speed Front panel
Integrated
RJ45 LED Off
Amber
Green No link
10/100BASE-T operation
1000 BASE-T operation
GENET1
ACT TSEC1
Activity Front panel
Integrated
RJ45 LED Off
Blinking Green No activity
Activity proportional to bandwidth
utilization
GENET2
SPEED TSEC2
Link/Speed Front panel
Integrated
RJ45 LED
(Left) Off
Amber
Green No link
10/100BASE-T operation
1000BASE-T operation
GENET2
ACT TSEC2
Activity Front panel
Integrated
RJ45 LED Off
Blinking Green No activity
Activity proportional to bandwidth
utilization