Artesyn MVME2500 ECC Installation and Use (August 2014) - Manual (Page 69)

Functional Description
MVME2500-ECC Installation and Use (6806800N30F) 69
4.2.3 PCI Express Interface
The PCI Express interface is compatible with the PCI Express Base Specification Rev. 1.0a. The
PCI Express controller connects the internal platform to a 2.5 GHz serial interface. The P20x0
has the options for up to three PCI-E interfaces with up to x4 link width. The PCI-E controller can
be configured to operate as either PCI-E root complex (RC) or as an endpoint (EP) device.
4.2.4 Local Bus Controller (LBC)
The main component of the enhanced LBC is the memory controller that provides a 16-bit
interface to various types of memory devices and peripherals. The memory controller is
responsible for controlling eight memory banks shared by the following: a general purpose
chip select machine (GPCM); a flash controller machine (FCM) and user programmable
machines (UPMs).
4.2.5 Secure Digital Hub Controller (SDHC)
The SDHC/eSDHC provides an interface between the host system and the memory cards such
as the MMC and SD. It is compatible with the SD Host Controller Standard Specification Ver. 2.0
and supports the following: SD, miniSD, SD Combo, MMC+ and RS-MMC card.
4.2.6 I
2
C Interface
The MVME2500-ECC uses only one of the two independent I
2
C buses on the processor. For
more information, see I2C Devices, on page 80 .
4.2.7 USB Interface
The P20x0 implements a USB 2.0 compliant serial interface engine. For more information, see
USB, on page 79 .