Artesyn MVME2500 ECC Installation and Use (August 2014) - Manual (Page 63)

Controls, LEDs, and Connectors
MVME2500-ECC Installation and Use (6806800N30F) 63
3.5 Switches
These switches control the configuration of the MVME2500-ECC.
3.5.1 Geographical Address Switch (S1)
The Tsi148 VMEbus Status Register provides the VMEbus geographical address of the
MVM2500-ECC. The switch reflects the inverted states of the geographical address signals.
Applications not using the five row backplane can use the geographical address switch to
assign a geographical address based on the following diagram.
8 TRIG_IN
9 MSRCID4
10 GND
Table 3-18 P20x0 Debug Header (continued)
Pin Signal Description
Board Malfunction
 Switches marked as “reserved” might carry production-related functions and can cause
the board to malfunction if their settings are changed.
 Do not change settings of switches marked as “reserved”. The setting of switches which
are not marked as “reserved” has to be checked and changed before board installation.