1 front panel connectors, 1 rj45 with integrated magnetics (j1), Table 3-3 – Artesyn MVME2500 ECC Installation and Use (August 2014) User Manual
Page 46: Front panel tri-speed ethernet connector (j1), Controls, leds, and connectors
Controls, LEDs, and Connectors
MVME2500-ECC Installation and Use (6806800N30F)
46
3.4.1
Front Panel Connectors
The following connectors are found on the outside of the MVME2500-ECC. These connectors
are divided between the front panel connectors and the backplane connectors. The front panel
connectors include the J1 and J5 connectors. The backplane connectors include the P1 and P2
connectors.
3.4.1.1
RJ45 with Integrated Magnetics (J1)
The MVME2500-ECC uses an X2 RJ45.
Table 3-3 Front Panel Tri-Speed Ethernet Connector (J1)
Pin Name
Signal Description
1A
GND
2A
NC
3A
Port A TRD3 -
4A
Port A TRD3 +
5A
Port A TRD2 -
6A
Port A TRD2 +
7A
Port A TRD1 -
8A
Port A TRD1 +
9A
Port A TRD0 -
10A
Port A TRD0 +
D1A
Port A Green LED1 Anode/ Yellow LED1 Cathode
D2A
Port A Yellow LED1 Anode/ Green LED1 Cathode
D3A
Port A Green LED2 Anode/ Yellow LED2 Cathode
D4A
Port A Yellow LED2 Anode/ Green LED2 Cathode
1B
GND
2B
NC
3B
Port B TRD3 -
4B
Port B TRD3 +
5B
Port B TRD2 -