Artesyn MVME2500 ECC Installation and Use (August 2014) - Manual (Page 31)

Hardware Preparation and Installation
MVME2500-ECC Installation and Use (6806800N30F) 31
2.3.1 Environmental Requirements
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Table 2-1 Environmental Requirements
Characteristics Commercial Versions Extended Temperature Versions
Applicable Variants MVME2500-01080101E
MVME2500-01080101S
MVME2500-02120201E
MVME2500-02120201S
MVME2500-02100202E
MVME2500-02100202S
Cooling Method Forced Air 27 CFM
1
Forced Air 27 CFM
1
Operating
Temperature 0°C to +55°C -40°C to +71°C
Storage -40°C to +85°C -50°C to +100°C
Vibration Sine
(10min/axis) 2 G, 5 to 2000 Hz 10 G, 15 to 2000 Hz
Vibration Random
(1hr/axis) 0.01g2/Hz, 15 to 2000 Hz 0.04g2/Hz, 15 to 2000 Hz (8
GRMS)
2
Shock 20g/11 mS 30g/11 mS
Humidity to 95% RH (non-condensing) to 100% RH (non-condensing)
1. ft3/min minimum
2. Flat 15-1000Hz, -6db/octave 1000Hz - 2000Hz [MIL-STD 810F Figure 514.5C-17]