AMETEK Compact i/iX Series - Manual (Page 81)

User Manual Compact i/iX Series
AMETEK Programmable Power California Instruments 81
4.3 Output Programming
4.3.1 Set the Output
Output parameters are all set from the PROGRAM screen.
1. Use the MENU key and select the PROGRAM entry.
2. Press the ENTER key to bring up the PROGRAM menu.
or
2. Use the SET key to directly bring up the PROGRAM menu.
There are two methods for programming output parameters:
IMMEDIATE mode
SET mode
4.3.2 Slewing Output Values in IMMEDIATE Mode
The default mode of operation is an immediate mode in which changes to output parameters made
with the knob or the entry keypad are immediately reflected at the output.
To change the output voltage:
1. Place the cursor on the VOLT entry
2. Rotate the shuttle knob clockwise to increase the value, counterclockwise to decrease the value or
use the Keypad to enter a value and press the Enter key.
These changes take effect immediately.
To change the output frequency:
1. Place the cursor on the FREQ entry
2. Rotate the shuttle knob clockwise to increase the value, counterclockwise to decrease the value or
use the keypad to enter a value and press the Enter key.
These changes take effect immediately.