AMETEK Compact i/iX Series - Manual (Page 29)

User Manual Compact i/iX Series
AMETEK Programmable Power California Instruments 29
auxiliary unit. (See Notes, see section 3.10.) This option is not field
installable and must be specified at the time of original unit order.
This option is mutually exclusive with the
–RPF and –EXS option.
-RMS Rack mount slides. Available for Series II models only.
-RPV Remote programming voltage. DC voltage input 0 to 10 VDC for 0 to full-
scale output voltage programming.
-RPF Remote programming frequency. DC voltage input 0 to 10 VDC for 0 to
800 Hz output frequency programming. Input impedance is 20 Kohm.
This option is mutually exclusive with the
–LKS option.
-WHM Watt-hour measurement option.
2.9 LKM / LKS Options - Supplemental Specifications
The Clock and Lock option enables two or more independent 751/1501iX power systems to be phase
synchronized to each other. One system (-LKM) acts as the master, the other(s) (-LKS) as auxiliaries. The
–LKS
units are synced to the –LKM unit. Refer to section 3.10 for details on Clock and Lock mode.
The following supplemental specifications apply when the 751/1501iX is configured with the Clock and Lock
option. (-LKM or
–LKS).
Parameter Supplemental Specification
Voltage
Voltage Distortion Standard specifications apply.
Frequency
Range 16 – 819 Hz
Resolution 0.1 Hz
Accuracy ± 0.025%
2.10 RPF Option - Supplemental Specifications
The –RPF option allows an external dc reference to be used to program the output frequency. The following
supplemental specifications apply when the 751/1501i/iX is configured with the remote programming frequency
option. (-RPF).
Note that loss of input signal while in RPF mode could result in a DC output from the AC source eventhough it is
in AC mode. If this is potentially damaging to the eut, care should be take to always have a minimum input signal
level. See section 3.7.3 (
Auxiliary I/O Connector – J32
) for RPF input connection.
Parameter Supplemental Specification
Voltage
Voltage Distortion Standard specifications apply.
Frequency
-RPF Range 0 – 819 Hz for 0 to 10 Vdc input.
Resolution 0.1 Hz
Accuracy ± 0.05 %