AMETEK Compact i/iX Series - Manual (Page 132)

User Manual Compact i/iX Series
AMETEK Programmable Power California Instruments 132
10.4 Available MIL-STD 704 Tests
10.4.1 STEADY STATE
AC Mode:
1. Steady State Voltage and Frequency test
2. Waveform Distortion test
3. Voltage Modulation test
4. Voltage Unbalance test
5. Phase Unbalance test
6. Frequency Modulation test
7. Voltage Modulation test
8. Transient Voltage low and high test
9. Transient Frequency low and high test
DC Mode:
1. Steady State Voltage test
2. Ripple test (limit frequency range).
10.4.2 EMERGENCY STATE
AC Mode:
1. Emergency Voltage minimum and maximum test
2. Emergency Frequency minimum and maximum test
DC Mode:
1. Emergency Voltage minimum and maximum test
10.4.3 ABNORMAL STATE
AC Mode:
1. Abnormal Voltage under
2. Abnormal Voltage over
3. Abnormal Frequency under
4. Abnormal Frequency under
DC Mode:
1. Abnormal Voltage under
2. Abnormal Voltage over