beautypg.com

AMETEK Compact i/iX Series User Manual

Page 134

background image

User Manual

Compact i/iX Series

AMETEK Programmable Power

California Instruments

134

10.6 AC Test Mode

Following sections cover testing in AC output mode.

10.6.1 Steady State Tests

Scroll to the STEADY STATE entry using the up and down cursor keys. Press the ENTER key to select
the STEADY STATE screens. The screen will appear as shown in Figure 10-3

Figure 10-3: Steady State Menu

The MIL704 Steady state screens have the following tests:

1. VOLTAGE

2. FREQUENCY

3. VOLT UNBALANCE

4. PHASE DIFFERENCE

5. VOLT MODULATION

6. FREQ MODULATION

7. VOLT TRANSIENT

8. FREQ TRANSIENT

9. DISTORTION

The above tests can be selected by scrolling to the highlighted selection using the up and down cursor
keys and the ENTER key to start the selected test.

VOLTAGE

This test will change the output voltage in the sequence shown in Table 10-1.

SEQUENCE

VOLTAGE

TIME

400Hz/VFREQ

60Hz only

1

108

110

1 minute

2

118

125

1 minute

3

115

115

1 minute

Table 10-1: Steady state voltage

The

key (backspace) will terminate the test at any time.