beautypg.com

Altera CPRI v6.0 MegaCore Function User Manual

Page 110

background image

Differences Between CPRI v6.0 IP Core and CPRI

IP Core

A

2014.08.18

UG-01156

Subscribe

Send Feedback

The CPRI v6.0 IP core achieves low latency and lower resource utilization than the legacy CPRI IP core

and provides new interfaces for direct access to the CPRI frame. The signals, registers, and register fields

are different: you cannot simply substitute the new IP core for the legacy IP core in your design without

additional design work.
To compare the CPRI v6.0 IP core to previous releases of the CPRI IP core, refer to the table and to the

Altera documentation about the revision history of the CPRI IP core.

Table A-1: Major Differences Between the CPRI v6.0 IP Core Initial Release and the CPRI IP Core

The Altera CPRI IP core is a product available through several previous Altera software releases. The differences

in signals, registers, and register fields are too numerous to list in this table.
The comparison is defined relative to the version of the legacy CPRI IP core available with the Altera software

release v14.0.

Property

CPRI v6.0 IP Core (Initial Release)

CPRI IP Core

CPRI specification

Complies with the CPRI

Specification V6.0 (2014-08-30).

Complies with the CPRI Specifi‐

cation V5.0 (2011-09-21).

IP core installation

IP core is available for installation

and integration into your ACDS

installation from the Altera Self-

Service Licensing Center.

IP core is included in Altera

MegaCore IP Library.

Device support

Supports Arria 10, Arria V GZ, and

Stratix V device families.

Supports Arria II (GX and GZ),

Arria V (GX, GT, and GZ),

Cyclone IV GX, Cyclone V GX,

Stratix IV GX, and Stratix V

device families.

CPRI line bit rate

Supports CPRI line bit rates through

10.1376 Gbps.

Supports CPRI line bit rates

through 9.8304 Gbps.

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134