beautypg.com

Opencore plus time-out behavior, Opencore plus time-out behavior -7 – Altera CPRI v6.0 MegaCore Function User Manual

Page 11

background image

OpenCore Plus Time-Out Behavior

OpenCore Plus hardware evaluation can support the following two modes of operation:
• Untethered—the design runs for a limited time.

• Tethered—requires a connection between your board and the host computer. If tethered mode is

supported by all MegaCore functions in a design, the device can operate for a longer time or

indefinitely.

All MegaCore functions in a device time-out simultaneously when the most restrictive evaluation time is

reached. If a design contains more than one MegaCore function, a specific IP core's time-out behavior

may be masked by the time-out behavior of the other IP cores.
Note: For MegaCore functions, the untethered time-out is 1 hour; the tethered time-out value is

indefinite.

Your design stops working after the hardware evaluation time expires.

Related Information

AN 320: OpenCore Plus Evaluation of Megafunctions

Information about the OpenCore Plus feature.

UG-01156

2014.08.18

OpenCore Plus Time-Out Behavior

1-7

About the CPRI v6.0 IP Core

Altera Corporation

Send Feedback