StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 95)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 83
Adding a Spare to the Spare Pool
This function allows the user to add up to eight (8) drives to the spare pool to reconstruct any
critical array on the controller. After an array has started using a pool spare, other critical
arrays are prevented from using it. If a pool spare is too small (not enough capacity to replace
the smallest member in the array), the controller cannot use it.
To add a pool spare:
1. Select Pool Spare Menu from the System Menu and press Enter.
The Pool Spare Menu should now display (Figure 56).
2. Select Add Pool Spare and press Enter.
The Select Drives screen should now display (Figure 57).
Figure 56: Pool Spare Menu Screen