StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 122)

110 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
Displaying All Drives
This function allows the user to display a list of all drives connected to the controller, including:
• Channel
• SCSI target ID
• Size
• Manufacturer
• Model number
• Drive firmware revision
If any of the drives are members of an array, the following information may also display:
• Utility running (Expand, Verify, etc.)
• Array number (the array's sequential position in the controller's array list)
• Member number ( the drive's sequential position in the array)
The drives that are not members of any array are listed as AVAILABLE. Drives that contain
leftover metadata from a previous array are listed as LEFTOVER. To clear metadata, use the
Clear Metadata function (refer to section "Clearing Metadata from a Drive" for further
information).
To display all drives:
1. Select Display Drives from the System Menu and press Enter.
The Display Drives screen should now display (Figure 74).