StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 19)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Installation 7
Typical RAID Channel Configurations
NOTE: When using the optional InfoStation I/O repeater modules, StorCase recommends the
use of Port A-1 & A-2 when configuring typical RAID channels (as shown in Figure
3B). In the special cases where extra length cables are required (up to 12m max-
imum), use Port B instead.
Figure 3A: Typical InfoStation RAID Module 2x4 Dual-Channel Configuration
(InfoStation Chassis with Standard I/O Modules)
NOTE:
Maximum 15 Disks per SCSI Channel (15 Disks x 4 channels = 60 Disks
To
tal)
IFS_RAID27FC
T
=Terminator FC Host/Device 1
LoopBack or Cascade
LoopBack or Cascade
FC Host/Device 0
Disk Ch. 3
Disk Ch. 2
Disk Ch. 0 Disk Ch. 1