StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 113)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 101
If battery is disabled, the controller WILL NOT give any warnings, nor will it disable the write-
back cache. Once battery settings are changed, the controller will need to be rebooted for
any changes to take effect.
To change the battery setting:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 38).
2. Select Option Configuration and press Enter.
The Option Configuration screen should now display (Figure 54).
3. Select the Battery and press Enter.
The Battery screen will display (Figure 68)
The current setting is marked with an * next to it.
4. Select the desired option and press Enter.
Figure 68: Battery Screen