StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 101)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 89
4. Enter the desired date and press Enter.
Enter the date in the following format - MM/DD/YYYY.
The system will confirm your request to set the date.
5. Select Yes and press Enter.
6. Press Esc to return to the Configuration Menu.
To set the time:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 38).
2. Select Set Date/Time and press Enter.
The Set Date/Time screen should now display (Figure 58).
3. Select Set Time and press Enter.
The Set Time screen should now display (Figure 60).
4. Enter the desired time and press Enter.
Use the following format - hh:mm:ss.
The system will confirm your request to set the time.
5. Select Yes and press Enter.
6. Press Esc to return to the Configuration Menu.
Figure 60: Set Time Screen