StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 46)

34 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
Verifying an Array
This function allows the user to verify data on a specified array (RAID 3, RAID 4, RAID 5, RAID
50, and Mirrored arrays only).
• RAID 3, RAID 4, RAID 5, and RAID 50 - Verifies all parity blocks in the selected array
and corrects any bad parity.
• Mirrored - Compares the primary and secondary drives. If a mismatch occurs, the
primary is copied to the secondary.
Verify an array whenever a problem is suspected.
To verify an array:
1. Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
16).
2. Select the array to verify and press Enter.
The Array Menu should now display (Figure 17).
3. Select Verify Function and press Enter.
The Verify Menu should now display (Figure 24).
Figure 24: Verify Menu Screen
4. Select Start Verify and press Enter.