StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 93)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 81
To enable dynamic spares:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 38).
2. Select Option Configuration and press Enter.
The Option Configuration Menu should now display (Figure 54).
3. Select Dynamic Spare Configuration and press Enter.
The Dynamic Spare Configuration screen will display (Figure )
The current setting is marked with an * next to it.
Figure 54: Option Configuration Menu Screen