StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 30)

18 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
Creating a Single-Partition Array
This function allows the user to create single-partition arrays. Once a single-partition array
has been created, more partitions can be added later. Single-partition arrays work well in
environments that need one large, fault-tolerant storage space for data on one server.
To create a single-partition array:
1. Select Add an Array from the System Menu and press Enter.
The Enter Array Name screen should now display (Figure 10).
Figure 10: Enter Array Name Screen
2. Enter a name for the array and press Enter.
Up to 35 characters (any character, including spaces) can be used. If no name is to
be used, just press Enter (a name may be added or changed later).
The system will now ask if you want to create one partition for the entire array.
3. Select Yes to create a single-partition array and press Enter (for creating multiple-
partition arrays, refer to section "Creating a Multiple-Partition Array" for further
information).
The LUN screen should now display (Figure 11).
The LUN displayed is the suggested default LUN assignment.