StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 74)

62 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
Figure 43: LUN Exclude/Include List Screen
3. Select the desired option (from the choices below) and press Enter.
- Display Host List: Displays a list of the servers currently on the include/exclude
list for the selected partition. This option will only display servers
if Add Host to List was already used (and one or more WWNs
added to an include/exclude list).
- Add Host to List: Displays the Enter Host WWN screen. This option allows the
user to add a server to the current list for the selected partition.
Enter the WWN or name (alias) or select the server from the list
and press Enter.
- Remove Host from List: Displays the Remove Host from List screen, including a list of
the servers currently on the include/exclude list for the selected
partition.
- Change Zone Type: Displays the Change Zone Type screen. The four (4) options
are listed below:
Include All - Permits all servers on the network to access the selected array.
Hosts All servers can access all partitions. If an include/exclude list
(Default) was already created, this option can be used to override the
list. The existing list is retained (the user can still display, add,
or remove servers from the list).
Include Listed - Allows the user to enter or select the WWNs or names (aliases)
Hosts of the specific servers intended to access the selected partition.