Deleting an array – StorCase Technology Fibre-to-SCSI Single RAID User Manual
Page 54
42
Configuration
StorCase Technology, Inc.
S10C100 User's Guide - Rev. A01
5.
Press Esc twice to return to the System Menu.
6.
Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
16).
7.
Select the desired array and press Enter.
The Array Menu should now display (Figure 17).
8.
Select Trust Array and press Enter.
The system will now confirm your request to trust the array.
9.
Select Yes and press Enter.
NOTE:
If the array does not come back online, it may be because there are too many members
offline. Or, it may be because the array may have additional failures on the bus (or
enclosure) that the Trust Array option cannot fix.
Deleting an Array
This function allows the user to delete an array when the array is no longer needed or when
the drives are needed for another use.
CAUTION:
Deleting an array will delete all partitions and data stored in that array!
Before reusing the drives, performing a low-level format on each drive is
recommended.
NOTE:
An array cannot be deleted while any utility (Initialize, Verify, Expand, or Reconstruct)
is running on the array. The utility must be stopped (if possible) or completed before
the array can be deleted.
To delete an array:
1.
Select Delete an Array from the System Menu and press Enter.
The Select Array screen should now display (Figure 16).
2.
Select the array to be deleted and press Enter.
The system will now confirm your request to delete the array.
3.
Select Yes and press Enter.