StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 34)

22 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
8. If the Number of Spares screen displays, enter the number of spares to add and press
Enter.
This creates dedicated spares that can only be used in this array. A dedicated spare
drive will not be available for any other use (refer to section "Managing Spares" for
further information).
If no spare is desired, simply enter 0.
The Select Drives screen should now display (Figure 14).
9. Select the drive to be used as a dedicated spare and press Enter.
NOTES: Only available drives (drives that aren't members of an array and are not assigned
as dedicated or pool spares) will be displayed. A drive is selected by highlighting
it and then pressing Enter. Each selected drive turns gray in the drive list. To skip
a drive, use the é or ê key.
A dedicated spare can be deleted from the array at any time (refer to section
"Deleting a Dedicated Spare" for further information).
If the array created is RAID 3, RAID 4, RAID 5, or RAID 50, the Chunk Size screen will
display (Figure 15).
Figure 15: Chunk Size Screen