Resetting partition statistics – StorCase Technology Fibre-to-SCSI Single RAID User Manual
Page 62
50
Configuration
StorCase Technology, Inc.
S10C100 User's Guide - Rev. A01
Resetting Partition Statistics
This function allows the user to reset the following partition statistics to zero:
Read
Write
SecRd
SecWt
I/O Size
NOTE:
Resetting statistics also resets the statistics for this partition that are included in the
total overall statistics (refer to section "Displaying Overall Statistics" for further
information).
The user may want to reset the statistics after monitoring performance, benchmark testing,
or after a change in how the partition is used.
To reset partition statistics:
1.
Display the Partition Menu.
The Partition Menu should now display (Figure 32).
From the Array Menu
From the All Partitions Menu
1.
Select Array Menu from the
System Menu and press Enter.
The Select Array screen should now display, along with a
list of existing arrays.
2.
Select the desired array and
press Enter.
The Array Menu screen should now display.
3.
Select Partition Menu and press
Enter.
The Select Partition screen should now display along with a
list of exisiting partitions for the selected array.
4.
Select the partition to be viewed
and press Enter.
The Partition Menu screen should now display.
1.
Select Partitions Menu from the
System Menu and press Enter.
The Select Partition or Free Area screen should now display,
along with a list of existing partitions and free space.
2.
Select the desired partition and
press Enter.
The Partition Menu screen should now display.
3.
Select Partition Menu and press
Enter.
The Select Partition screen should now display along with a
list of exisiting partitions for the selected array.
4.
Select the partition to be viewed
and press Enter.
The Partition Menu screen should now display.
IFS_80