StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 109)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 97
Changing the Sampling Rate
This function allows the user to set how often the controller samples data when updating disk
and array status screens (default setting is one second).
To change the sample rate:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 38).
2. Select New Sample Rate and press Enter.
The New Sample Rate screen should now display.
3. Enter the desired sample rate and press Enter.
Changing the Alarm Mute Setting
This function allows the user to enable/disable the audible alarm. Changing the mute setting
allows the user to turn OFF the alarm (the alarm should be turned back ON once the problem
is resolved).
Alarm conditions will trigger event messages that display in the Disk Array Administrator Utility
and in the event log (refer to section "Displaying the Event Log" for further information).