StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 120)

108 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
Restoring Default Settings
This function allows the user to restore all of the controller's default settings. This is useful
when the controller is not working properly and the cause cannot be determined. The user
can then change the settings critical to the configuration.
NOTE: Restoring default settings does not change any LUN zoning settings. The zoning
information is stored on the array as metadata and is saved.
To restore the default settings:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 38).
2. Select Restore Defaults and press Enter.
The Restore Default screen will display.
The current setting is marked with an * next to it.
The system will confirm your request to restore default settings.
3. Select Yes and press Enter.
4. Press Enter to return to the Configuration Menu.