StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 72)

60 Configuration
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
To change the name (alias), enter the new name in Step 5 (refer to section "Viewing
Known WWNs" for further information).
If the controller is unaware of any WWNs, the list will be empty. Select Enter Host
to enter a WWN.
NOTE: The controller will automatically attempt to assign a default name (alias) to a WWN
if one was not already user-assigned. The default name (if available) will be the
name of the server's Host Bus Adapter's (HBA) manufacturer, enclosed in <>
brackets (for example, a QLogic HBA will have a default name of ).
5. Select the WWN to be named and press Enter.
The Enter Host Name screen should now display.
6. Enter the name (alias) and press Enter.
Up to 16 characters (any combination of characters, including spaces) can be used.